Hello everyone,
I recently transitioned from a standard Raspberry Pi 4B to a Compute Module 4 (CM4), and I'm encountering a perplexing issue. Despite ensuring that the script paths are identical on both systems, I keep receiving the error: [Errno 2] No such file or directory.
Here’s what I’ve done so far:
I have verified that the file paths used in the script are correct and identical on both the standard Pi 4B and the CM4.
The scripts are running fine on the Pi 4B without any issues.
Upon switching to the CM4, the scripts fail to execute properly, resulting in the mentioned error.
I made sure that all necessary hardware interfaces and configurations (e.g., SPI) are enabled in /boot/firmware/config.txt on the CM4.
The script includes file operations, interfacing with hardware components, and utilizing the Kivy framework.
Given that the file paths and environment are supposed to be consistent between the two systems, I'm at a loss as to why this error is occurring only on the CM4.
Has anyone experienced a similar issue when migrating from a Raspberry Pi 4B to a Compute Module 4? Any insights or solutions to resolve this [Errno 2] No such file or directory error would be greatly appreciated.
Thank you in advance for your help and suggestions!
I recently transitioned from a standard Raspberry Pi 4B to a Compute Module 4 (CM4), and I'm encountering a perplexing issue. Despite ensuring that the script paths are identical on both systems, I keep receiving the error: [Errno 2] No such file or directory.
Here’s what I’ve done so far:
I have verified that the file paths used in the script are correct and identical on both the standard Pi 4B and the CM4.
The scripts are running fine on the Pi 4B without any issues.
Upon switching to the CM4, the scripts fail to execute properly, resulting in the mentioned error.
I made sure that all necessary hardware interfaces and configurations (e.g., SPI) are enabled in /boot/firmware/config.txt on the CM4.
The script includes file operations, interfacing with hardware components, and utilizing the Kivy framework.
Given that the file paths and environment are supposed to be consistent between the two systems, I'm at a loss as to why this error is occurring only on the CM4.
Has anyone experienced a similar issue when migrating from a Raspberry Pi 4B to a Compute Module 4? Any insights or solutions to resolve this [Errno 2] No such file or directory error would be greatly appreciated.
Thank you in advance for your help and suggestions!
- Image may be NSFW.
Clik here to view.
Statistics: Posted by dgy411852 — Wed Feb 28, 2024 9:14 pm
